Home > Aluminium Bronze Sheets and Plates
**Adrian Nickel Alloys**, located in Pulau Ujong, Singapore, stands out as a trusted manufacturer and supplier of **Aluminium Bronze sheets and plates**. They provide top-notch non-ferrous metal solutions tailored for critical industrial applications. Renowned for its durability, strength, and impressive resistance to corrosion, aluminium bronze finds its place in various sectors, including marine, aerospace, oil & gas, and chemical processing. Adrian Nickel Alloys offers a diverse range of sheets and plates in different grades, thicknesses, and dimensions, all while adhering to international standards to ensure a reliable supply for both standard and custom needs.
The **Aluminium Bronze sheets and plates** from Adrian Nickel Alloys typically feature **9% to 12% aluminium**, along with varying levels of **iron, nickel, and manganese**, depending on the specific alloy grade (like C95400, C95500, C95900). These alloys are known for their **high tensile strength (up to 850 MPa)**, **excellent wear resistance**, and **superior corrosion resistance**, particularly in marine and acidic environments. The manufacturing process follows standards such as **ASTM B505 / B171**, guaranteeing quality and consistency for structural and mechanical applications.
| Specifications | ASTM B505 / ASME SB505, BS EN 10088-2, en 10028-7, IS 6911, AMS 4640, UNS C63000, UNS C95800, UZ19AL6, UNS C95510, AMS 4880 |
| Dimensions | MSRR, AMS, BS, JIS, AISI, ASTM, GB, DIN, EN, etc |
| Size Range | Cold Rolled : 0.5-6.4 mm Hot Rolled : 3.0–10.0 mm |
| Width | 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc |
| Length | 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc |
| Thickness | 0.3 mm to 120 mm |
| International Standard of Sheets | ASTM A480 ASTM A959 ASME IID EN ISO 9445 EN ISO 18286 EN 10051 EN 10088-1 ISO 15510 |
| Tolerances (width / thickness) | EN 10258/ DIN 59381 EN 10151 EN 10088 |
| Finish | 2B, 2D, BA NO (8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled, 1D, 2B, No.4, BA, 8K, satin, mirror etc. |
| Hardness | Half Hard, Soft, Hard, Quarter Hard, Spring Hard |
| Form | Sheet, Plain Sheet, Flat Shim, Flat Sheet, Shim Sheet, Rolling Sheet, soft annealed, descaled, sheared, annealed |
| Value Added Service | Cladding, Heat Treatment, Annealed, Pickling, Polish, Rolling, Cutting, Bending, Forging, Minor Fabrication Etc. |
| Profiling | Plasma Plate Cutting Laser Plate Cutting Oxy-propane Flame Cutting |
| Alloy | Aluminium | Iron | Nickel | Manganese | Zinc | Arsenic |
| CuAl5 | 4.0–6.5% | 0.5% max. | 0.8% max. | 0.5% max. | 0.5% max. | 0.4% max. |
| CuAl8 | 7.0–9.0% | 0.5% max. | 0.8% max. | 0.5% max. | 0.5% max. | |
| CuAl8Fe3 | 6.5–8.5% | 1.5–3.5% | 1.0% max. | 0.8% max. | 0.5% max. | |
| CuAl9Mn2 | 8.0–10.0% | 1.5% max. | 0.8% max. | 1.5–3.0% | 0.5% max. | |
| CuAl10Fe3 | 8.5–11.0% | 2.0–4.0% | 1.0% max. | 2.0% max. | 0.5% max. | |
| CuAl10Fe5Ni5 | 8.5–11.5% | 2.0–6.0% | 4.0–6.0% | 2.0% max. | 0.5% max. |
| Properties | Metric | Imperial |
| Hardness, Rockwell C | 27 | 27 |
| Tensile strength (M30 and O61 tempers) | 690 MPa | 100000 psi |
| Yield strength (M30 and O61 tempers) | 380 MPa | 55100 psi |
| Elongation at break (in 50 mm, 1% reduction in area) | 1.00% | 1.00% |
| Elastic modulus | 117 GPa | 17000 ksi |
| Compressive yield strength (at permanent set of 0.1%) | 450 MPa | 65300 psi |
| Compressive yield strength (at permanent set of 1%) | 880 MPa | 128000 psi |
| Poisson’s ratio | 0.34 | 0.34 |
| Charpy impact (@ 18.0 – 100°C/ -0.400 – 212°F, keyhole) | 3.00 J | 2.21 ft-lb |
| Izod impact (@ 18.0 – 100°C/ -0.400 – 212°F) | 3.00 J | 2.21 ft-lb |
| Fatigue strength (@# of cycles 1.00e+8, M30 temper) | 460 MPa | 66700 psi |
| Machinability (UNS C36000 (free-cutting brass) = 100) | 20 | 20 |
| Shear modulus | 42.3 GPa | 6140 ksi |
Aluminium Bronze sheets and plates produced in Pulau Ujong, Singapore, are utilized across a broad spectrum of industries for **components that face friction, corrosion, and high mechanical stress**. Typical applications include **pump and valve components**, **bearing surfaces**, **marine hardware**, **heat exchanger parts**, and **offshore structural systems**. Thanks to their unique blend of strength and corrosion resistance, these materials are perfectly suited for **saltwater environments**, **chemical plants**, and **aerospace structures**. Adrian Nickel Alloys is committed to delivering top-quality surface finishes, precise dimensions, and test certifications with every order.
Contact us to get a quick quote for your requirement.
Aluminum bronze sheets and plates are widely used in applications requiring high strength, corrosion resistance and durability. Typical applications include marine environments for ships, moorings and marine water pumps, where corrosion resistance is required. It is used in aerospace, industrial equipment, pharmaceutical and oil and gas industries. Because of their excellent corrosion resistance, these alloys are ideal for applications such as valves, shafts and fasteners. Their oxidation resistance and superior mechanical properties make them perfect for harsh environments and heavy materials.
